Dimensions

External: 530w x 325d x 345h mm
Internal: 385w x 290d x 200h mm
Water level: Maximum 180mm ^{shelf fitted working depth 135mm}
Packed size: 40 x 43 x 63cm

Capacity

Nominal Tank Capacity: 22 litres

Temperature Range

ambient +5°C - 99°C ^{With accessory DC1-300 provides cooling from ambient to 0°C.}

Voltage

120V or 230V models models 50-60Hz

Packed Weight

9 kg

Temperature setting

Digital in ±0.1°C increments

Temperature control

PID Digital, LED display, resolution 0.1°C

Temperature alarm

+4°C heater cut off, indication. -4°C, indication.

Sensitivity

±0.05°C

Uniformity

±0.01°C

Timer

variable, 00:01 to 99:59 [hh:mm] ^{Activates at set temperature}

Controls

Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion-timed period. Settings retained even after turning the unit off.
Easy to use controls, utilising touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer.
The water bath can be set to run at a set temperature or commence the timer once the water reaches set temperature.
Features auto setting over and under temperature alarm protecting your work at set temperature.
Every unit undergoes a factory calibration at two temperatures for validation.

Safety Features

When a low liquid level is detected a “FiLL” message appears and heating is suspended. Once the bath is topped up, heating and temperature control automatically resumes.
Protecting your work there is auto setting, Over and Under Temperature alarms, operating at +4°C and -4°C about set temperature with heater cut off, visual message and indicator.

Heat up times

190 mins - 0°C

120 mins - 100°C

40 mins - 60°C

15 mins - 37°C

Heating/Cooling Information

For water temperatures below ambient we recommend a glycol/water mix or accessory solution LB-5.0 Lab Bath, accessory lid or spheres fitted to retain the cold and an accessory DC1-300 Immersion Cooler. Recommend operating in ambient temperature 20°C.
For water temperatures above 60°C we recommend accessory lid or spheres fitted for optimal performance, reduce evaporation, assists keeping work and water free from contamination, saves energy reducing electricity consumption and running costs.

Heater Power (220-240V)

1250W

Power Consumption (220-240V)

1300W

Energy Consumption

0.5kWh @ 37°C
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.

Warranty Period

3 Years