Dimensions

External: 365w x 278d x 321h mm
Internal: 300w x 240d x 200h mm

Capacity

Nominal Tank Capacity: 9 litres
Brimful Capacity: 12 litres

Temperature Range

30 – 80°C in 5°C increments.

Voltage

230V or 120V models

Packed Weight

8 kg

Temperature Display

Analogue temperature setting in increments of 5°C

Temperature Setting

Dial setting for temperature range

Heat-up Times

110 mins - 60°C

80 mins - 50°C

50 mins - 40°C

Heating/Cooling Information

1. It is recommended that to achieve consistent heating, minimise evaporation and act as a dust cover, preventing contamination when ultrasonic bath is not in use, it should be covered with LD series accessory lid.
2. It is essential that a BSK series Basket are used in order to prevent items from touching bottom or side of the tank.
3. Accessories detailed below.

Safety Features

1. Safe to run dry - The heating elements mounted to the ultrasonic units are special ceramic heating elements which are electronically triggered by changes of the liquid level. The heating elements are mounted inside the unit and controlled electronically to reduce energy demand, preventing overheating.
2. Bath is fitted with non-slip feet.

Safety Class

1

Heater Power (220-240V)

800W

Power Consumption (220-240V)

1000W

Drain Tap Fitted

Drain is easy to reach on the rear of the bath, with a drain tap on the side making it easy to open and close with clear symbols on position and function.

Immersed Components

304 spec (18/8) stainless steel.

Warranty Period

3 Years

Notes

Ultrasonics advisory information.

This range is designed for intermittent and permanent on use. In use do not allow items to touch base of the tank, BSK series Baskets or LD series Lids are recommended in order to prevent items from touching bottom or side of the tank - accessories detailed below.

Ultrasonics specification.

Sonics effective power = 200W

Sonics peak power = 800W

Modulation = 100Hz

Operating frequency = 38kHz

Transducers = 4

Ultrasonic intensity = 2.6W/cm2

Laboratory Apps

For the cleaning of glassware and complicated instruments.

Removal of chemical residues, coking and soot, baked residues of chemical reactions, microbiological residues. With these ultrasonic baths your instruments will be clean without any residues.

The Degas function quickly degasses the liquid without accumulation of bubbles. Samples and HPLC solvents must be free of gas bubbles for analysis.

For increased ultrasonic power, the "Boost" function allows an increase of 20% in ultrasonic performance. Permanent operation possible for tenacious contamination.