Banho Digital de 28L com "Thermostirrer"
Descrição

Stirred Clifton water baths are designed for immersion of flasks/bottles/racks in an accurate temperature environment throughout the water bath featuring digital PID temperature control.

 

The stainless steel tank contained within a sturdy outer case and supplied complete with a stainless steel shelf all providing good water circulation and temperature stability.

 

The Thermostirrer is robust constructed from stainless steel for durability. Painted surfaces feature a tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing excellent water temperature stability in the bath. Indication of heating, over temperature alarm and timer running.

 

When a low liquid level is detected a “FiLL” message automatically appears and heating is suspended. Once refilled, heating is restored and temperature control resumes automatically. Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

Especificações

Dimensions

External: 537w x 332d x 240h mm
Internal: 395w x 298d x 200h mm
Water level: Maximum 180mm shelf fitted working depth 135mm
Packed: 62 x 41 x 37cm

Capacity

Nominal Tank Capacity: 28 Litres

Temperature Range

ambient +5°C - 99°C Accessory DC1-300 or DC2-300 provide cooling from ambient to -20°C

Voltage

120V or 230V models 50-60Hz

Temperature control

PID Digital, LED display, resolution 0.1°C

Temperature alarm

+4°C heater cut off, indication. -4°C, indication.

Sensitivity

±0.05°C

Uniformity

±0.01°C

Timer

variable, 00:01 to 99:59 [hh:mm] Activates at set temperature

Heater Power (220-240V)

1250W

Voltage

120V or 230V models 50-60Hz

Packed Weight

14.7 kg

Controls

Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion-timed period. Settings retained even after turning the unit off.
Easy to use splash proof controls, touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer. Bold digital LED display.
The water bath can be set to run at a set temperature or commence the timer once the water reaches set temperature.
Features auto setting over and under temperature alarm protecting your work at set temperature.
Every unit undergoes a factory calibration at two temperatures for validation.

Safety Features

When a low liquid level is detected a “FiLL” message appears and heating is suspended. Once the bath is topped up, heating and temperature control automatically resumes.
Protecting your work there is auto setting, Over and Under Temperature alarms, operating at +4°C and -4°C about set temperature with heater cut off, visual message and indicator.

Heat-up Times

630 mins - -10°C

380 mins - 0°C

50 mins - 60°C

20 mins - 37°C

Heating/Cooling Information

For water temperatures below ambient we recommend a glycol/water mix or accessory solution LB-5.0 Lab Bath, accessory lid or spheres fitted to retain the cold and an accessory DC1-300 Immersion Cooler. Recommend operating in ambient temperature 20°C.
For water temperatures above 60°C we recommend accessory lid or spheres fitted for optimal performance, reduces evaporation and also assists keeping water free from contamination and saves energy reducing electricity consumption and running costs.

Power Consumption (220-240V)

1300W

Energy Consumption

0.55kWh @ 37°C
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.

Warranty Period

3 Years

 

Benefícios
  • Stirred Clifton water bath designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath.
  • Good water movement and temperature control provides temperature stability throughout the water bath.
  • Three-year warranty and comprehensive customer support.
  • Broad range of accessories available to suit wide range of applications.
  • Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
  • To verify the performance of the temperature control system every unit undergoes a factory 2 point calibration procedure adjusting control to known traceable values.
  • Thermostirrer controls and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes.
Acessórios

SL4-22: Stainless Steel Gable Lid to fit 22 and 28 Litre Stirred Baths

Features:

1. The Gable lid has been designed allowing full use of whole width of a Clifton water bath with the lowest height of the gable being 45mm above the bath. This unique feature means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid maximising the bath working area.

2. Designed with customer in mind ensuring where condensation accumulates in use there are no drip points which could spoil work in open flasks in your Clifton water bath.

3. Where an accessory TC-1 Thermometer is used the temperature can be read from the thermometer with the lid in place.

4. Lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto your bench top.

LD4-22: Flat Lid, Stainless steel, 22/28 litre baths

Features:

Stainless steel construction with wipe clean surfaces. These LD4 Lids provide insulation and consistent water bath performance, reduce energy consumption and running costs. In use they reduce airborne particles contaminating the water. Fitted with insulated lifting handle for convenience.

 

DC1-300: Immersion Dip Cooler [ambient to -20°C]

Features:

1. Replaces wasteful use of water cooling.

2. Ozone freindly R134a CFC free gas.

3. Small bench footprint.

4. Quiet operation.

5. Powder painted body providing a durable finish and protection against corrosion.

6. Fitted with non-slip rubber feet for safety.

7. Dip Cooler is fitted with an overload protection device on the compressor.

DC2-300: Immersion Dip Cooler (ambient to -20°C)

Features:

1. This DC2-300 Immersion Cooler, offers increased cooling capacity.

2. Has an operating range from ambient to -20°C and its additional operating performance is particularly beneficial at these lower liquid temperatures especially in elevated ambient temperatures or larger volume stirred or circulating water baths.

3. Features a flexible 900mm long stainless steel pipe with a protective outer shield, exiting from top of the unit, making the stainless steel cooling coil naturally stand in the corner of any Clifton stirred or circulating water bath. This maximises the working area within the bath and reduces the chance of ‘cold shock’, the opportunity of the freezing cold coil accidentally intruding or touching and spoiling work.

4. The DC2-300 replaces wasteful use of cold water-cooling.

5. High efficiency condensers allowing operation in higher ambient temperatures.

6. Uses HFC refrigerant - R134a.

7. Single low noise level fan.

8. The unit is fitted with casters, which can be locked when sited, for easy mobility.

9. Completes a 100% leak and performance tests before leaving the factory here at Nickel-Electro. The performance test is conducted over 2 days, starting with an initial gas fill and cool down test with a NE4-8D Stirred water bath recording and verifying the time taken to reach 0°C, -15°C and -20°C ensuring it achieves specification. Repeated the next day.

10. Each unit is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

 

LDR6-22: Ringed Lid, stainless steel, 6 x 105mm holes, to suit 22/28 litre baths

Features:

1. The lid and rings are manufactured from stainless steel.

2. The concentric rings provide varying hole diameters in the lid.

3. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

Downloads
Descrição Referência Preço Quantidade
Banho digital de 28L com "thermostirrer" NE4-28D ***
Immersion Dip Cooler (amb a -20ºC) DC1-300 ***
Immersion Dip Cooler (amb a -20ºC) DC2-300 ***
Tampa em inox para banho de 22 e 28L LD4-22 ***
Tampa em inox c/ 6x105mm ø p/ banho de 22 e 28L LDR6-22 ***
Tampa em inox para banho de 22 e 28L SL4-22 ***
*** Registe-se ou faça LoginAdicionar
à minha lista
Voltar